‘Space Ferrari’ falls to Earth

November 11, 2013
By
Deeter Does Wirless

Goce satelliteGoce needed its engine power to stay in orbit

The European Space Agency’s (Esa) Goce satellite has re-entered the Earth’s atmosphere, burning up in the process.

Early estimates suggested any surviving debris could have fallen somewhere along a path through East Asia and the Western Pacific to Antarctica.

Dubbed the “Ferrari of space” because of its sleek looks, Goce is the first Esa mission to make an uncontrolled re-entry in more than 25 years.

The gravity mapping probe’s plunge was inevitable once it ran out of fuel.

The mission was operating in an extremely low orbit – at 224km altitude, the lowest of any scientific satellite – and needed to constantly thrust an electric engine to stay aloft, but last month its fuel reserves were exhausted.

Pre-return modeling had indicated that perhaps a fifth to a quarter of Goce’s one-tonne mass could have endured the fiery fall through the atmosphere.

Its sophisticated gradiometer – the instrument used to make gravity measurements – incorporated composite materials that were expected to ride out the destructive forces that would ordinarily incinerate traditional components.

Tracking project

Goce was last observed at 22:42 GMT on Sunday as it passed 121km (75 miles) above Antarctica,

It has fuel and thrusters to direct its destructive dive towards the vast and uninhabited waters of the Southern Ocean, east of New Zealand.

The Inter-Agency Space Debris Coordination Committee – the global forum on “space junk” – chose Goce as its special study project for 2013.

Goce geoid (Esa)Goce’s principal objective was to make maps of the variation in the pull of gravity across the Earth

This meant a large number of tracking and surveillance facilities around the world were activated to monitor the satellite’s descent to Earth.

More detailed information is therefore likely to emerge in the coming hours and days on exactly where and when any materials struck the surface of the planet.

Statistics show that there is typically at least one piece of space “junk” re-entering the Earth’s atmosphere every day; with, on average, one intact defunct spacecraft or old rocket body coming back every week.

Esa’s last mission to make an uncontrolled re-entry was the magnetosphere explorer Isee-2, which came back in 1987.

The agency does, however, regularly manage controlled re-entries. Its space station freighter, the Automated Transfer Vehicle, can weigh some 13 tonnes when it comes back to Earth.

Goce (Gravity Field and Steady-State Ocean Circulation Explorer) was launched in 2009 as part of a series of innovative environmental research satellites.

Its super-sensitive gradiometer was used to detect the tiny variations in the pull of gravity across the surface of the Earth.

Its maps have very broad applications. The data is a key reference in civil engineering for relating heights measured at widely separated locations, and for the computer models that need to understand how the oceans move to forecast future changes in climate.

Deeter Does Wirless

Article source: http://www.bbc.co.uk/news/science-environment-24894611#sa-ns_mchannel=rss&ns_source=PublicRSS20-sa The feed :

Tags:

Sponsored By:

The Deeter Group

Deeter Electronics Ltd. | Deeter Electronics Inc | Deeter Group Asia | Deeter Group Germany | Deeter Group Corporate

Head & Registered Office:
Deeter Electronics Ltd.
Deeter House,
Valley Road,
Hughenden Valley,
Bucks. HP14 4LW

Tel: +44 (0) 1494 566 046
Fax: +44 (0) 1494 563 961
E-mail: [email protected]


The Deeter Group with products ranging from: , , , continuous , 4-20mA , , , , , , , a , wireless sensor and much more.

If you want a standard or a custom level switch, float switch, level sensor, or wireless sensor, contact us via email [email protected] or call us now on 01494 566 046.

Company Name: The Deeter Group

Location: Hughenden Valley, UK

Deeter Electronics USA
Deeter Electronics USA
Wireless sensor system | Radio telemetry | Level switches | Level sensors | Liquid level sensor | Float switches | Controllers & indicators | Industrial weighing equipment | Electronic circuit design & manufacture | Software design | Reed relays | Ultrasonic level flow sludge & proximity sensors | Proximity sensors & switches | Reed switches | Litz wire | Wago Terminals | Mechanical & magnetic floats | Boiler control |

Deeter Electronics UK
Wireless sensor system | Radio telemetry | Level switches | Level sensors | Liquid level sensor | Float switches | Controllers & indicators | Industrial weighing equipment | Electronic circuit design & manufacture | Software design | Reed relays | Ultrasonic level flow sludge & proximity sensors | Proximity sensors & switches | Reed switches | Litz wire | Wago Terminals | Mechanical & magnetic floats | Boiler control |

Deeter Electronics Europe
Wireless sensor system | Radio telemetry | Level switches | Level sensors | Liquid level sensor | Float switches | Controllers & indicators | Industrial weighing equipment | Electronic circuit design & manufacture | Software design | Ultrasonic level flow sludge & proximity sensors | Proximity sensors & switches | Reed switches | Litz wire | Wago Terminals | Mechanical & magnetic floats | Boiler control |

Sensor Magazine Websites
Explosion Proof Sensors UK | Explosion Proof Sensors | Water Level Measurement | Liquid Level Sensing | Liquid Level Measurement | Liquid Level Sensors UK | Liquid Level Sensors Europe | Wireless Sensors | Sensor Magazine | Industrial Sensors



Water use